commander c200

Commander C200

Inverter (VSD) Commander telah dibuktikan memiliki standar terbaik dalam motor controller sejak tahun 1983 dimana pada tahun tersebut Control Technique memasarkan inverter pertama sekali. Sejak itu, Commander telah melalui beberapa perbaikan yang membawa ke arah teknologi dan inovasi yang baru ke dunia otomatisasi.

Inverter (VSD) Commander telah dibuktikan memiliki standar terbaik dalam motor controller sejak tahun 1983 dimana pada tahun tersebut Control Technique memasarkan inverter pertama sekali. Sejak itu, Commander telah melalui beberapa perbaikan yang membawa ke arah teknologi dan inovasi yang baru ke dunia otomatisasi.

Keunggulan Commander C

✓ Menyetel empat parameter untuk menjalankan inverter
✓ Memiliki opsi modul Plug-in untuk kontrol lanjutan
✓ Tersedia Dual Safe Torque Off (STO)
✓ Dilengkapi denagn fitur hemat energi terbaru
✓ Overload hingga 180% untuk aplikasi torsi tinggi
✓ Dilengkapi PLC
✓ Dapat langsung dipasang dan dijalankan
✓ Mudah dikoneksi dengan motor dan kontrol
✓ Desain yang kuat dan andal
Applications
Specifications
Commander C adalah solusi sempurna untuk semua aplikasi di seluruh industry.

Seri Commander C dirancang dengan simpel dan ringkas sebagai pengontrol kecepatan motor AC yang memenuhi persyaratan tingkat lanjutan dalam berbagai aplikasi. Desain yang kecil adalah salah satu keunggulan bagi OEM dan pembuat mesin dalam penghematan ruang.

Pompa, Ventilasi dan Kompresi

  • Peningkatan efisiensi energi saat waktu tidak bekerja(idle time)
  • Terpasangnya PLC dan PID di Inverter menjadikannya lebih mudah dan efektif tanpa menggunakan controller eksternal
  • Lewati Frekuensi memungkinkan pengguna menghindari resonansi peralatan dan mengurangi tingkat getaran yang tinggi
  • Supply Loss Ride Through akan membuat drive tetap menyala dan berjalan melalui gangguan daya yang besar

Pengangkutan (Conveyor)

  • Kontrol kecepatan jarak jauh yang akurat denagn komunikasi fieldbus
  • Profil akselerasi atau deselerasi S-ramp memberikan transisi kecepatan yang stabil meminimalkan sentakan.
  • Menghindari kerusakan dini peralatan
  • Kapasitas kelebihan beban hingga 180%

Angkat dan derek (Lifting, Hoisting & Winching)

  • Rem mekanikal yang dapat diatur dengan rangkaian torsi membuktikan fungsi spesial
  • Fungsi PLC dapat mengelola IO yang sudah terintegrasi tanpa menambah konroller ekesternal

Akses Kontrol

  • Gerakan drive yang halus dengan kontrol open-loop yang ditingkatkan
  • Ukuran fisik yang kecil memungkinkan inverter dipasang dengan mudah di ruang yang sempit
  • Sangat andal dipasang di area lingkungan yang keras, dan daya tahan produk yang lama.

Processing (Mixers, Kneaders, Crushers, Agitators, Centrifuges, Extruders)

  • Mudah diintegrasikan ke PLC eksternal dengan protokol yang dapat disesuaikan
  • Tersedia proteksi sesuai dengan konforma yang dibutuhkan
  • Kapasitas kelebihan beban sampai 180%
  • Mengatur motor yang sangat stabil
Control Mode
Open loop vector or V / Hz induction motor control ✓  
Open loop Rotor Flux Control for induction motors (RFC-A) ✓ 
Environment
Ambient Operating TemperatureSize 1 - 4: -20°C to 40°C (-4°F to 104°F) @ 3 kHz switching freq. | Operation to 60°C (140°F) with de-rating
Size 5 - 9: -20°C to 40°C (-4°F to 104°F) @ 3 kHz switching freq. | Operation to 55°C (131°F) with de-rating
Cooling MethodForced convection
Humidity95 % non-condensing at 40 °C (104 °F)

Storage Temperature

Size 1 - 4: -40°C to 60°C (-40°F to 140°F) — 24 months Max.
Size 5 - 9: -40°C to 55°C (-40°F to 131°F) — 24 months Max.
AltitudeDe-rate the continuous output current by 1% for every 100 m (328 ft) above 1000 m (3,280 ft) to a maximum of 3000 m (9,840 ft)
VibrationTested in accordance with IEC 60068-2-64 and IEC 60068-2-6
Mechanical ShockTested in accordance with IEC 60068-2-27 and IEC 60068-2-29
Enclosure RatingIP20, NEMA 1 conduit kits available
Electromagnetic CapabilityIEC/ EN 61800-3 Immunity and Emissions
EN 61000-6-2: Immunity for industrial environments
EN 61000-6-4: Emissions for industrial environmentsM/br> EN 61000-3-2: Harmonic current emissions
An EMC data sheet is available on request
RoHSComplies with the Restriction of Hazardous Substances Directive (2011/65/EU)
AC Supply Requirements
Voltage

100 V models: 100 to 120 Vac ±10%
200 V models: 200 to 240 Vac ±10%
400 V models: 380 to 480 Vac ±10%
500 V models: 500 to 575 Vac ±10%
690 V models: 500 to 690 Vac ±10%

Phase1Ø and 3Ø (Model dependent)
Maximum Supply Imbalance2% negative phase sequence, 3% voltage imbalance between phases
Input Frequency 45 to 66 Hz
Input Displacement Power Factor0.97
Control
Switching FrequencySize 1 - 4: 0.667, 1, 2, 3, 4, 6, 8 12 & 16 kHz
Size 5 - 9: 2, 3, 4, 6, 8 12 & 16 kHz
Output Frequency Range 0 to 550 Hz
Frequency Accuracy±0.02% of full scale
Frequency Resolution 0.01 Hz
Analog Input Resolution Voltage mode: 11 bits (unipolar) Current mode: 11 bits
Braking Dynamic braking transistor included, requires external resistor
Protection
DC Bus Undervoltage Trip100 V models: 175 Vdc
200 V models: 175 Vdc
400 V models: 330 Vdc
DC Bus Overvoltage Trip Frame sizes 1 - 4:
100 V models: 510 Vdc
200 V models: 510 Vdc
400V models: 870 Vdc
Frame size 5 - 9:
200V models: 415 Vdc
400 V models: 830 Vdc
Drive Overload TripProgrammable: Default settings: 180% for 3s, 150% for 60s
Instantaneous Overcurrent Trip 220% of rated motor current
Phase Loss Trip DC bus ripple threshold exceeded
Over-temperature Trip Drive heatsink temperature exceeds 95°C (203°F)
Short Circuit Trip Protects against output phase-to-phase fault
Ground Fault Trip Protects against output phase-to-ground fault
Motor Thermal Trip Electronically protects the motor from overheating due to loading conditions
Approval & Listings
UL, cULUL file NMMS/8: E171230
CE CE approval
EU These products comply with the Restriction of Hazardous Substances Directive (2011/65/EU), the Low Voltage Directive (2014/35/EU) and the Electromagnetic Compatibility Directive, (2014/30/EU).
RCM RCM Registered supplier No. 12003815281
ISO Manufacturing facilities comply with ISO 9001:2015 and ISO 14001
TÜV 

C300 models only: The Safe Torque Off (STO) function may be used as a safety component of a machine.

Type examination certificates by TÜV Rheinland:
Frame sizes 1 - 4: No. 01/205/5383.03/18
Frame sizes 5 - 9: No. 01/205/5387.02/18

Functional safety parameters:
EN ISO 13849-1 - Cat 4, PLe
EN61800-5-2/EN62061/IEC 61508 - SIL 3

UL functional safety approval: FSPC E171230


Open chat